Phantom Flex 4K

Phantom Flex 4K

1000fps at 4K Resolution
64GB Internal RAM
2TB Cine Mags

 

Product detail

Specs
Media Recording

Cine Raw recording: Up to 31 x 64GB RAW data recordings can be saved to 2TB Cinemag. Trimming data before uploading to the Cinemag can result in significantly more takes being saved. 1 Hour and 50 minutes of 24 fps CineRaw footage can be stored on a 2TB CineMag IV

ProRes422HQ recording: Available at 4096 x 2304 resolution only. In Run/Stop (RS) mode the camera will allow up to 30 fps direct to the CineMag. In LOOP mode, the camera will allow up to 938 fps to RAM, before the file is saved to the CineMag. Saving in ProRes HQ mode takes about 3 times longer to the CineMag than saving RAW. The files in the mag are about 2.5X smaller than the un‐interpolated RAW files, and take that much shorter to save from the camera or CineStation IV. Over 5 hours of 24 fps ProRes HQ footage can be stored on a 2TB CineMag IV

Resolution / Max FPS / 64GB Record Duration

4K (4096x2304) - 938 FPS - 5.0 Secs
UHD (3840x2160) - 1000 FPS
2K (2048x1152) - 1877 FPS
HD (1920x1080) - 1944 FPS - 9.8 Secs
720P (1280x720) - 2930 FPS

Memory

64GB high-speed internal RAM

ISO

EI 800-1000 ( Recommended )

Sensor Specs

CMOS sensor; 4096 x 2304 pixels; 6.75 µm pixel size; 27.6 mm x 15.5 mm; Super-35mm, 31.7mm diagonal; Super-16mm format at 1920 x 1080

Exposure

Exposure time (shutter speed): 5μs to 1/frame rate
Can be set in degrees or microseconds (μs)
1-millisecond progressive scan (aka rolling) shutter

Special Features

Three main 3G HD-SDI outputs, supporting dual-link 4K video and simultaneous live monitoring / playback
HD-SDI can switch between Rec709 and Log
Supports both HD-SDI and component based viewfinders
Standard internal mechanical shutter for automatic/remote Current Session Reference (CSR)
Secondary IP address
Segment memory for multi-cine acquisition
Field-based firmware upgrade capable
Several mounting holes for accessories on camera body

Signalling

4x 3G HD-SDI output BNCs (one reserved for viewfinder)
1x 3G HD-SDI return BNC, supports Genlock
Sync connector, for Trigger, time code, F-sync
Remote (RCU) port
Component viewfinder port
Four Aux ports for power and trigger
(2x 12VDC and 2x 24V)

Weight

13 lbs; 5.9 kg (Body only)

Body Dimensions

12 x 6 x 8 in. (L x W x H); 30.5 x 35.5 x 20.3 cm (without lens or viewfinder)

Operating Temps

-20° - +50° C

Includes
1

Anton Bauer Gold Battery Mount

$15 day
1

Vision Research PL Lens Mount - Flex

$0 day
1

Abel Cine LWS Cine Style Riser - Flex

$0 day
1

Abel Cine Snap On Shoulder Pad

$0 day
1

Iris Rod 15mm x2 - 9" Length

$2 day
1

VRI-2KA500X-FLEX4K Sync Cable

$0 day
1

Phantom Pickle Switch Remote Trigger

$0 day
2

LEMO 2pin to XLRF 4pin 12v AKS Cable

$0 day
2

Fischer to Ethernet Phantom Control Cable - 10'

$10 day
2

Fischer 3pin to XLRM 3pin 24v Power Cable

$15 day
2

Ethernet Barrel

$1 day
1

USB Stick with Software

$0 day
1

ELPAC 24v AC Power Supply to Fischer 3pin

$0 day
1

ELPAC 24v AC Power Supply to XLRF 3pin

$0 day
1

Apple MacBook Pro 15" Thunderbolt/USB 3.0 For Camera Control - Includes Thumbdrive,

$150 day
1

Arri BP-8 Bridge Plate - 19mm

$35 day
1

Iris Rod 19mm x 2 - 12" Length

$2 day
1

Arri 12" Dovetail Base Plate

$20 day
1

Ethernet Extension Cable - 50'

$10 day
Resources